Difference between revisions of "Template:IODD Firmware Update"

From iODD
Jump to: navigation, search
(Created page with ": Requires : A PC that have Windows OS and USB Port. : '''Warning''' - You Must connect only '''one iODD device''' : Please update the exact firmware matching the first partit...")
 
m
 
(7 intermediate revisions by the same user not shown)
Line 1: Line 1:
: Requires : A PC that have Windows OS and USB Port.
+
: Requirements : PC ( Windows OS, USB Port)
: '''Warning''' - You Must connect only '''one iODD device'''
+
: '''Warning''' - You must connect only one iODD device.
 
: Please update the exact firmware matching the first partition of iODD.
 
: Please update the exact firmware matching the first partition of iODD.
: If you update wrong firmware, retry the update with correct firmware.
+
: If you update wrong firmware, retry the updater with correct firmware.
 
# Download the below firmware file.
 
# Download the below firmware file.
 
# Uncompress the zip file to proper folder.(Do not run it within zip file)
 
# Uncompress the zip file to proper folder.(Do not run it within zip file)
# Run the EXE file.
+
# Run the <span class="notranslate">EXE</span>  file.
# ''Device is Detected'' message appears and press ''Update'' button.
+
# If <span class="notranslate">"Device is Detected"</span> message appears, then press <span class="notranslate">"Update"</span> button.
 
#* If not, follow the next steps
 
#* If not, follow the next steps
 
#* Use another PC.
 
#* Use another PC.
 
#* Change the USB cable.
 
#* Change the USB cable.
#* Press the Reset button and hold, and connect the iODD, and hold until ''iodd 25x1'' appears in LCD. and Update.(This button is on the main PCB inside iODD)
+
#* (for 2541.) Press the Reset button and hold, and connect the iODD. and hold the button for 1 second. and run the firmware updater.(this reset button is on the main PCB inside iODD.)
# If successful, Press ''Exit'' button. and reconnect iODD.
+
#* (for 2531.) Press the Reset button and hold, and connect the iODD. and hold the button until USB detection (for about 5 seconds). and run the firmware updater.(this reset button is on the main PCB inside iODD.)
 +
# If it is successful, then press <span class="notranslate">"Exit"</span> button. and reconnect iODD.

Latest revision as of 16:51, 29 June 2016

Requirements : PC ( Windows OS, USB Port)
Warning - You must connect only one iODD device.
Please update the exact firmware matching the first partition of iODD.
If you update wrong firmware, retry the updater with correct firmware.
  1. Download the below firmware file.
  2. Uncompress the zip file to proper folder.(Do not run it within zip file)
  3. Run the EXE file.
  4. If "Device is Detected" message appears, then press "Update" button.
    • If not, follow the next steps
    • Use another PC.
    • Change the USB cable.
    • (for 2541.) Press the Reset button and hold, and connect the iODD. and hold the button for 1 second. and run the firmware updater.(this reset button is on the main PCB inside iODD.)
    • (for 2531.) Press the Reset button and hold, and connect the iODD. and hold the button until USB detection (for about 5 seconds). and run the firmware updater.(this reset button is on the main PCB inside iODD.)
  5. If it is successful, then press "Exit" button. and reconnect iODD.