Difference between revisions of "Template:IODD Firmware Update"

From iODD
Jump to: navigation, search
m
m
Line 11: Line 11:
 
#* Change the USB cable.
 
#* Change the USB cable.
 
#* Press the Reset button and hold, and connect the iODD. and hold the button until "Iodd 25x1" appears in LCD. and run the firmware updater.(this reset button is on the main PCB inside iODD.)
 
#* Press the Reset button and hold, and connect the iODD. and hold the button until "Iodd 25x1" appears in LCD. and run the firmware updater.(this reset button is on the main PCB inside iODD.)
# If successful, Press <span class="notranslate">''Exit''</span> button. and reconnect iODD.
+
# If successful, Press <span class="notranslate">Exit</span> button. and reconnect iODD.

Revision as of 16:11, 17 June 2016

Requirements : PC ( Windows OS, USB Port)
Warning - You must connect only one iODD device.
Please update the exact firmware matching the first partition of iODD.
If you update wrong firmware, retry the updater with correct firmware.
  1. Download the below firmware file.
  2. Uncompress the zip file to proper folder.(Do not run it within zip file)
  3. Run the EXE file.
  4. If "Device is Detected" message appears, then press "Update" button.
    • If not, follow the next steps
    • Use another PC.
    • Change the USB cable.
    • Press the Reset button and hold, and connect the iODD. and hold the button until "Iodd 25x1" appears in LCD. and run the firmware updater.(this reset button is on the main PCB inside iODD.)
  5. If successful, Press Exit button. and reconnect iODD.