View source for Iodd-ST300

<!-- {{TOC right}} -->
== Iodd ST300 ==
== Appearance ==
<gallery mode="packed-hover"  heights="240px">
File:ST300-011.png
File:ST400-019.png
File:ST300-021.png
</gallery>

== Functions ==
# Bootable Virtual CD-ROM Drive.(DVD-ROM, Blu-ray)
#* There is no need to buy DVD-ROM and blank media for OS installation.
#* [[wken:ISO_image|ISO]] <span class="notranslate">(CD, DVD, Blu-ray)</span> is supported.
# Bootable Virtual USB Drive and Flash Drive.
#* supports OS installation and Multi Booting. (and <span class="notranslate">"Windows-To-Go"</span>)
#* [[msko:vhd|*.VHD]] , [[wken:VMDK|*.VMDK]] and *.RMD (Virtual HDD), [[wken:IMG_(file_format)|*.IMA]] (Virtual FDD) are supported.
#* Selectable Write Protection on each drive.
#* Selectable Fixed or Removable Function on each drive.
# Multi LUN
#* Max 3 VHD, 1 ODD and 1 real Drive at the same time.
# Display of minimum voltage(VBUS), drive temperature and health information ( <code>3</code> Key )
# hotkeys
#* Various start key and hotkey support.
# Other features
#* Write Protection 
#* Safe removal
#* Save loading state
# Text file viewer
#* UTF-16 (UCS-2) and ASCII code support
#* Some Asian codes are not supported
# Bitmap file viewer (experimental)
#* Supports under 128x160 size
#* 1-bit, 16-bit, 24-bit support

=== Menu ===
:<code>2</code> - moves cursor up.
:<code>8</code> - moves cursor down.
:<code>6</code>, <code>⏎</code> - Execution key.
# <span class="notranslate">'''''Mode Setting'''''</span> Device Configuration.
#:<code>5</code> - Toggles Write Protection On/Off. Icon is changed.
#:<code>6</code> - Toggles Fixed / Removable drive. Icon is changed.
#:<code>3</code> - moves selection up.
#:<code>9</code> - moves selection down.
#:<span class="notranslate">''---disabled---''</span> The following devices are disabled.
## <span class="notranslate">''ODD''</span> - Virtual CD Drive. (*.iso) 
## <span class="notranslate">''HDD''</span> - Real Drive.
## <span class="notranslate">''VHD''</span> - VHD Drive. (*.vhd, *.ima)
# <span class="notranslate">'''''USB Control'''''</span>.
## <span class="notranslate">''Write Protect''</span> - Write-Protection for All Drives. 
## <span class="notranslate">''Refresh''</span> - Reconnect.
## <span class="notranslate">''Safe Removal''</span> - stop the spindle motor and go to power saving mode
# <span class="notranslate">'''''Information'''''</span> - Information
## <span class="notranslate">''S.M.A.R.T.''</span> - inform the following status of the internal Disk Drive
### <span class="notranslate">''HDD Health''</span> - Disk Drive Health 
###* <span class="notranslate"><< Good >></span> - Clear
###* <span class="notranslate"><< Warning >></span> - Suggest to replace the drive.
###* <span class="notranslate"><< Bad >></span> - Need to replace the drive.
### <span class="notranslate">''HDD Model''</span> - Disk Drive Model
### <span class="notranslate">''HDD Serial''</span> - Disk Drive Serial
## <span class="notranslate">''Product Info''</span> - Product Info
### <span class="notranslate">''Firmware Ver''</span> - iODD's Firmeare Version
### <span class="notranslate">''USB Speed''</span> - Currently connected USB Speed
###* <span class="notranslate">''Full - speed''</span> - USB 1.1
###* <span class="notranslate">''Hi - speed''</span> - USB 2.0
###* <span class="notranslate">''Super - speed''</span> - USB 3.0
# <span class="notranslate">'''''Setting'''''</span> - Settings
## <span class="notranslate">''LCD Bright''</span> - adjusts LCD back-light brightness
## <span class="notranslate">''Load Default''</span> - restores all settings to their default values
# <span class="notranslate">'''''Language'''''</span> - Set the language.
## <span class="notranslate">''English''</span> - English
## <span class="notranslate">''한글''</span> - Korean
## <span class="notranslate">''简体中文''</span> - Chinese
## <span class="notranslate">''日本語''</span> - Japanese
## <span class="notranslate">''Русский''</span> - Russian

=== Basic Functions ===
==== Supported Disk Patition ====
:[[wken:wiki/Master_boot_record|MBR]] , [[wken:GUID_Partition_Table|GPT]].
:FAT32, EXFAT, NTFS.
:Multi Partitions can be used. There is no root folder name constraint. (_ISO)

====  Sample Folder Tree ====
:This folder tree is an example.
:Any file name and folder name are acceptable
 <code>'''J:'''</code>
 ├─ <code>'''_ISO'''</code>
 │  │  Hiren’s BootCD 15.2.iso
 │  │  ubuntu-14.04.4-desktop-amd64.iso
 │  │  Windows 10.iso
 │  │  Windows XP sp3.iso
 │  │  '''(max 32 files or subfolders in a folder)'''
 │  │  
 │  ├─<code>IMA for Floppy</code>
 │  │      Bios updater.ima
 │  │      MS-DOS 6.0.ima
 │  │      Symantec Ghost.ima
 │  │      
 │  ├─<code>RMD Files</code>
 │  │      Win 7Ent_x86_x64+8.1Pro+10Pro vol2.RMD
 │  │      Win7_Ult_SP1_Russian_x64.RMD
 │  │      Windows 10.RMD
 │  │      
 │  └─<code>VHD Files</code>
 │      │  linuxmint-17.3-cinnamon-32bit.vhd
 │      │  Windows 10 Win2Go.vhd
 │      │  Windows 7 OS Booting.vhd
 │      │  
 │      └─<code>'''Nested Subfolders is allowed'''</code>
 ├─<code>Your Folder 01</code>
 ├─<code>Your Folder 02</code>
 ├─<code>Your Folder 99</code>
 │  Your files 01.txt
 │  Your files 02.txt
 │  Your files 99.txt

==== Key Defines ====
# Browsing
#* <code>2</code> / <code>8</code> - Up/Down Selection Point.
#* <code>6</code>, <code>⏎</code> - Select a file or Enter to a folder.
#* <code>4</code> - Go to parent folder.
# Menu
#* <code>⚙</code> - Enter to Menu. (or Exit). 
# HotKeys - Press Key Once
#* <code>1</code> - Rescan root folder.
#* <code>3</code> - Display VBUS minimum voltage, disk drive temperature and health information.
#* <code>5</code> - View file information.
#* <code>7</code> - Eject the latest virtual hard drive or virtual CD.
#*: Display full filename, size and fragmentation of the current file.
#* <code>9</code> - Save Loading Status.
#* <code>0</code> - View Help.
#*: Display informations of current menu or error message.
# HotKeys - Press long ( for 3 seconds )
#* <code>1</code> - Reconnected.
#* <code>3</code> - Reconnected with Write-Protection.
#* <code>4</code> - View Partition list. Default partition can be selected.
#* <code>7</code> - Reconnected with all virtual drives detached.
#* <code>9</code> - USB connection is detached with sleep mode.
#* <code>0</code> - Reconnected with temporarily Write Protection disabled.
# Startup Key - Start with pressing a key.
#* <code>1</code> - Reset to factory settings.
#* <code>3</code> - Start with Write Protection.
#* <code>5</code> - Start  without connecting to PC.
#*: Finish all settings and reconnect or disconnect.
#* <code>7</code> - Start with all virtual drive unmounted.
#* <code>⚙</code> - Enter to menu without connecting to PC
#*: Finish all settings and reconnect or disconnect.
#* <code>0</code> - Displays startup key information without connecting to PC.
#*:Press and hold the corresponding startup key to reconnect with that function.
#*:Pressing any other key will reconnect without the startup key function.

==== Save Status and Disconnect ====
: Loading state is saved.
: Enter Sleep Mode.
* <code>9</code> Press long for 3 seconds

==== Selecting a file ====
: In order to maintain loading state, you must save the state.
* refer to the above key operations. [[#Key Defines]]

==== Safely Removal In OS ====
: If iODD's partition is NTFS, then this function is mandatory when disconnecting iODD from host.
: NTFS does not write Immediately the data to HDD.
* Please do [http://windows.microsoft.com/en-US/windows7/Safely-remove-devices-from-your-computer Safely Removal] before disconnection.

=== Initialization ===
* Initialize the drive with <span class="notranslate">([[wken:MBR]])</span> or <span class="notranslate">([[wken:GPT]])</span>.
* Format any partition to use with (NTFS | EXFAT | FAT32).
*: In FAT32 partition, there is 4G byte file size limitation. please use that carefully.
*: The Partition may not be first partition.
* Copy files or folders to Iodd. 
* safely remove ioddMini. ( very '''Important''' if NTFS). ([http://windows.microsoft.com/en-US/windows7/Safely-remove-devices-from-your-computer safely remove]).
* Reconnect Iodd.
* If the screen is not matched what you copyed, Press <code>4</code> for 3 seconds.
*: You can select the default partition.

=== Troubleshooting ===
: Follow these steps until the error is clear.
# press <code>7</code> and hold. and then connect to PC.
# press <code>1</code> and hold. and then connect to PC.
# Check Disk. ([[msen:check%20disk | for Windows]])
# Update with the latest firmware.
# Backup the data of iodd, and Do [[#Initialization|Initialization]]
: If It is hardware problem 
# Reboot the PC
# Change USB cable
# Connect to another PC.
# Connect to the PC with pressing <code>9</code> and <code>enter</code> for 7 seconds.
#: and will refresh with the same firmware.

=== Configure Multi Device ===
# Enter to ''Menu'' -> ''Mode Setting''.
# Refer to [[#Menu]]
# You can configure max 5 device individually.

=== Using a Virtual CD Drive (DVD-ROM or Blu-ray ROM) ===
# A ODD device is needed. ( [[#Configure Multi Device|Configure Multi Device]] )
# copy ISO files to ioddMini. (root or subfolder)
# [http://windows.microsoft.com/en-US/windows7/Safely-remove-devices-from-your-computer Safely Remove]. (Required for NTFS )
# Reconnect.
# select the file.
# If you want to save loading status, press <colde>9</code>.
# If PC doesn't find boot device, then reboot the PC. <span class="notranslate">(Ctrl-Alt-Del)<span>

==== Booting Error ====
* Confirm whether the ISO file is bootable.
* If your PC does not support multi LUN, please configure only one drive.
* Confirm whether the ISO file is bootable.
* Although it is bootable ISO file, please confirm whether the result with a real USB DVD-ROM is same.
* Try with USB Y-CABLE for adding external power. (ioddMini is a class of BUS powered USB device.
* If your laptop has own internal DVD-ROM, disable internal DVD-ROM at BIOS settings. or remove it.
* The older OS than motherboard may not have an appropriate driver to boot.
** ex) It is impossible to install a genuine Windows 7 on Skylake platform using USB DVD-ROM device.

=== Using a Virtual VHD drive (Virtual Hard Disk) ===
* At least one VHD device is needed. ( [[#Configure Multi Device|Configure Multi Device]] )
* Fixed-size VHD file only is supported. (dynamic VHD and VHDx files are not supported)
* Also fixed [[wken:VMDK|VMDK]] file is supported.
* Create VHD files directly to iODD by [[VHD Tool++|"VHD Tool++"]]. ("VHD Tool++" can creates a file without fragment)
*: Or You can copy VHD file to ioddMini directly. But the file must be unfragmented.
* Max 3 VHD Drives are supported at the same time.
# create a VHD file using this tool. ([[VHD Tool++|VHD Tool++]]).
# Reconnect.
# select the file.
# If you want to save loading status, press <colde>9</code>.
# Make an image to the VHD drive of ioddMini with image tool.

=== Using a Virtual USB Floppy Drive (Virtual FDD) ===
* Not all computers support this drive.
* Uncompressed floppy images (IMA, IMG, BIF, VFD) are supported.
* IMG, BIF, VFD image file extension must be renamed to IMA.
* Almost the same as the above method.

== Specifications ==
# External Interface - USB 3.1 C Type Gen 1 (MAX 5G bps)
# Internal Interface - SATA I / II / III (Backward Compatible)
# 2.5 Inch SATA HDD or SSD
# 12 tact switches.
# LCD - Color 128 * 160 dots.
# Material - Plastic.

== Manual ==
*[https://help.iodd.kr/ IODD Web Manul]
*[http://dir.iodd.kr/iodd_ST400/en Quick Guide (old)]

== Messages ==
=== Status Messages ===
# <span class="notranslate">'''"Please Wait ..."'''</span> - please wait.
# <span class="notranslate">'''"Disconnect ..."'''</span> - please disconnect.
# <span class="notranslate">'''"Saving data ..."'''</span> - please wait for saving data.
# <span class="notranslate">'''"Updating Flash ..."'''</span> - please wait for updating font or firmware.
# <span class="notranslate">'''"Reconnect USB"'''</span> - please reconnect.
# <span class="notranslate">'''"NO DEVICE !!!"'''</span> - HDD is not detected.
# <span class="notranslate">'''"HDD ERROR !!!"'''</span> - HDD Read Error. or Too many bad sectors.
# <span class="notranslate">'''"HDD WARNING ???"'''</span> - HDD have some bad Sectors.

=== Error Messages ===

<div class="toccolours mw-collapsible mw-collapsed" style="max-width:800px" >
<span class="notranslate">'''"Check HDD"'''</span> or '''Red Screen Popup''' - Check HDD
<div class="mw-collapsible-content">
* There is an error in the drive. Please Do [[#Troubleshooting|Troubleshooting]]
</div> </div>

<div class="toccolours mw-collapsible mw-collapsed" style="max-width:800px" >
<span class="notranslate">'''"No appropriate partition"'''</span> - There is no appropriate partition.
<div class="mw-collapsible-content">
* Initialize to MBR or GPT, and at least one of NTFS, EXFAT, or FAT32 is required.
* Please refer [[#Initialization|Initialization]].
</div> </div>

<div class="toccolours mw-collapsible mw-collapsed" style="max-width:800px" >
<span class="notranslate">'''"Drive Error"'''</span>
<div class="mw-collapsible-content">
* Unable to read the internal drive. 
* After disconnecting the drive, connect it to another device.
</div> </div>

<div class="toccolours mw-collapsible mw-collapsed" style="max-width:800px" >
<span class="notranslate">'''"Too Many Files"'''</span> - too many files in a folder.
<div class="mw-collapsible-content">
* The maximum number of files in one folder has been exceeded.
* ioddMini allows max 32 files or sub folders in a folder.
* Split the folder into subfolders.
</div> </div>

<div class="toccolours mw-collapsible mw-collapsed" style="max-width:800px" >
<span class="notranslate">'''..'''</span> - Parent folder.
<div class="mw-collapsible-content">
* There are no subfolders or supported files in the current folder.
</div> </div>

<div class="toccolours mw-collapsible mw-collapsed" style="max-width:800px" >
<span class="notranslate">'''"Disc Locked"'''</span> - Disc is locked
<div class="mw-collapsible-content">
* The disk is held by some programs. Please unlock the disk.
* If you want to unlock manually, reconnect the USB cable.
</div> </div>

<div class="toccolours mw-collapsible mw-collapsed" style="max-width:800px" >
<span class="notranslate">'''"DEFRAG"'''</span> - defrag
<div class="mw-collapsible-content">
* Fragmentation of ISO file is allowed up to 24 pieces. No for VHD.
* To solve, please do [[wken:Disk_Defragmenter_(Windows)|Disk Defragmenter]] for [[wken:Defragmentation| Disk Defragmentation]].
* Or for SSD, use [http://www.mydefrag.net/ Mydefrag] or [https://www.ccleaner.com/defraggler Defraggler]
</div> </div>

<div class="toccolours mw-collapsible mw-collapsed" style="max-width:800px" >
<span class="notranslate">'''"Not Use Dynamic"'''</span> - not supported dynamic VHD
<div class="mw-collapsible-content">
* Dynamic VHD is not supported. fixed VHD is only supported.
</div> </div>

<div class="toccolours mw-collapsible mw-collapsed" style="max-width:800px" >
<span class="notranslate">'''"Not Use  Sparse"'''</span> - not supported sparse file
<div class="mw-collapsible-content">
* Sparse files are not supported.
</div> </div>


<!--
<div class="toccolours mw-collapsible mw-collapsed" style="max-width:800px" >

<div class="mw-collapsible-content">

</div> </div>
-->

=== FAQ ===

<div class="toccolours mw-collapsible mw-collapsed" style="max-width:800px" >
IODD will not boot.
<div class="mw-collapsible-content">
* Refer to [[#Booting Error|Booting Error]]
</div> </div>

<div class="toccolours mw-collapsible mw-collapsed" style="max-width:800px" >
The LCD displays "IODD ST300" only.
<div class="mw-collapsible-content">
* Update firmware.
</div> </div>

<div class="toccolours mw-collapsible mw-collapsed" style="max-width:800px" >
Can I unmount the Virtual drives (VHD, RMD, IMA) that mounted?
<div class="mw-collapsible-content">
* Try one of the following steps.
# If you want to umount all drives, push <code> 7 </code>  for 3 seconds.
# If you want to umount each one, Move up the cursor and Select corresponding drive.
# If you want to umount most recently selected, push <code> 7 </code>.
</div> </div>

<div class="toccolours mw-collapsible mw-collapsed" style="max-width:800px" >
The Firmware update has failed repeatedly.
<div class="mw-collapsible-content">
Please refer to [[#How to update|How to update]]
</div> </div>

<div class="toccolours mw-collapsible mw-collapsed" style="max-width:800px" >
The Firmware update has failed repeatedly.
<div class="mw-collapsible-content">
Please refer to [[#How to update|How to update]]
</div> </div>

<!--
<div class="toccolours mw-collapsible mw-collapsed" style="max-width:800px" >

<div class="mw-collapsible-content">

</div> </div>
-->

== Firmware ==

=== How to update ===
: Requirements : PC ( Windows OS, USB Port)
: '''Warning''' - You must connect only one IODD device.
: Please update the exact firmware that matches IODD.
: If you update wrong firmware, retry with correct firmware.
# Download the firmware file.
# Uncompress the zip file to proper folder.(Do not run it within zip file)
# Run the <span class="notranslate">EXE</span>  file.
# If <span class="notranslate">"Device is Detected"</span> message appears, then press <span class="notranslate">"Update"</span> button.
#* If not, follow the steps below.
#* Use another computer.
#* Change the USB cable.
#* Press button <code> 9 </code>, <code> ⏎ </code> and hold, and connect to PC. and Release the buttons. and run the firmware updater.
# If it is successful, then press <span class="notranslate">"Exit"</span> button. and reconnect IODD. and wait for 2-3 minutes.

=== Latest ===
* [http://dir.iodd.kr/iodd_firmware_updater Download]

<!-- * 2017. 9. 27 - 80-00 - [ftp://sps.iodd.kr/filebase/2541/ntfs/iODD_2541_user_fw_writer_04(R080N_B00).zip NTFS 버전 '''7x'''], [ftp://sps.iodd.kr/filebase/2541/fat/iODD_2541_user_fw_writer_04(R080F_B00).zip FAT32/exFAT 버전 '''7x''']
** 리붓시 암호 이상 버그 수정 -->
<!--
=== Archives ===
-->