Difference between revisions of "IODD-2531"

From iODD
Jump to: navigation, search
m (Using Virtual USB Optical Drive (DVD-ROM or Blu-ray ROM))
m (Latest)
 
(85 intermediate revisions by the same user not shown)
Line 1: Line 1:
 +
[[ko:IODD-2531]]
 +
[[zh:IODD-2531]]
 +
[[ja:IODD-2531]]
 +
[[ru:IODD-2531]]
 +
 
== Appearance ==
 
== Appearance ==
 
<gallery mode="packed-hover" heights="240px">
 
<gallery mode="packed-hover" heights="240px">
Line 13: Line 18:
  
 
=== Menu ===
 
=== Menu ===
# '''''Mode-Select''''' - Define USB devices mode
+
# <span class="notranslate">'''''Mode-Select'''''</span> - Define USB devices mode
## ''Dual Mode'' - 1 Disk Drive and 1 Optical Disk Drive
+
## <span class="notranslate">''Dual Mode''</span> - 1 Disk Drive and 1 Optical Disk Drive
## ''HDD Mode'' - 1 Disk Drive
+
## <span class="notranslate">''HDD Mode''</span> - 1 Disk Drive
## ''CD Mode''   - 1 Optical Disk Drive
+
## <span class="notranslate">''CD Mode''</span> - 1 Optical Disk Drive
# '''''Setting'''''  
+
# <span class="notranslate">'''''Setting'''''</span> - Settings
## ''LCD Bright'' - Adjust LCD back-light bright
+
## <span class="notranslate">''LCD Bright''</span> - adjusts LCD back-light brightness
## ''Idle Bright'' - Adjust LCD back-light bright in power down mode
+
## <span class="notranslate">''Idle Bright''</span> - adjusts LCD back-light brightness in power saving mode
## ''Standby time'' - Adjust the inactive time before power down mode is on
+
## <span class="notranslate">''Standby time''</span> - adjusts the inactive time before power saving mode is active
## ''Load Default'' - Restoring all settings to their default values
+
## <span class="notranslate">''Load Default''</span> - restores all settings to their default values
# '''''Information'''''
+
# <span class="notranslate">'''''Information'''''</span> - Information
## ''S.M.A.R.T.'' - Display the following status of the internal Disk Drive
+
## <span class="notranslate">''S.M.A.R.T.''</span> - informs the following status of the internal Disk Drive
### ''HDD Temp'' - Disk Drive Temperature
+
### <span class="notranslate">''HDD Temp''</span> - Disk Drive Temperature
### ''HDD Health'' - Disk Drive Health
+
### <span class="notranslate">''HDD Health''</span> - Disk Drive Health
## ''HDD Model'' - Disk Drive Model
+
## <span class="notranslate">''HDD Model''</span> - Disk Drive Model
## ''HDD Serial'' - Disk Drive Serial
+
## <span class="notranslate">''HDD Serial''</span> - Disk Drive Serial
## ''Firmware Ver'' - iODD's Firmeare Version
+
## <span class="notranslate">''Firmware Ver''</span> - iODD's Firmware Version
## ''USB Speed'' - Currently connected USB Speed
+
## <span class="notranslate">''USB Speed''</span> - Currently connected USB Speed
## ''USB Input Volt'' - USB BUS voltage (Both Current and Minimum )
+
## <span class="notranslate">''USB Input Volt''</span> - USB BUS voltage (Also Minimum )
# '''''USB Connect'''''  
+
# <span class="notranslate">'''''USB Connect'''''</span> - USB Settings
## ''Refreah'' - Reconnect the iODD
+
## <span class="notranslate">''Refreah''</span> - Reconnect the iODD
## ''Safe Removal'' - Stop the spindle motor and power down the Disk Drive
+
## <span class="notranslate">''Safe Removal''</span> - stops the spindle motor and goes to power saving mode
# '''''Advanced'''''
+
# <span class="notranslate">'''''Advanced'''''</span> - Advanced Settings
## ''Umount VHDD'' - Umount All the Virtual Disk Drives
+
## <span class="notranslate">''Umount VHDD''</span> - Umounts All the Virtual Disk Drives
## ''Write Protect'' - Write Protect the internal Disk Drive (Not Virtual Drive)
+
## <span class="notranslate">''Write Protect''</span> - Write-Protection for the Drive.
## ''Instant Save'' -  
+
##* If virtual drive is mounted, this option applies to the virtual drive. (not optical drive)
## ''Force USB 3.0'' - Preserve USB 3.0 connection in harsh conditions
+
## <span class="notranslate">''Instant Save''</span> - Instant Save
 +
## <span class="notranslate">''Force USB 3.0''</span> - Preserves USB 3.0 Connection in harsh conditions
  
=== Specifications ===
+
== Specifications ==
 
# External Interface - USB 1.1 / 2.0 / 3.0 (MAX 5G bps)
 
# External Interface - USB 1.1 / 2.0 / 3.0 (MAX 5G bps)
# Internal Interface - SATA 1.0 / 2.0 / 3.0 (Backward Compatible)
+
# Internal Interface - SATA I / II / III (Backward Compatible)
# 2.5" HDD, SSD (9.5mm width) can be installed.
+
# 2.5 Inch HDD, SSD (9.5mm width) can be installed. 4TB+
# 3-way jog switch, Back Button, USB 3.0 micro B-Type connector.
+
#* If using IODD functions, Max 2TB partition can be used. Regardless of the disk size.
 +
#* 7mm disk drive requires a spacer.
 +
# 3-way jog dial, Back Button, USB 3.0 micro B-Type connector.
 
# LCD - 128 * 32 dots.
 
# LCD - 128 * 32 dots.
 
# Material - Aluminum, PC (Plastic).
 
# Material - Aluminum, PC (Plastic).
 +
# almost same as ZM-VE300. same architecture. improved hardware. Firmware updates continuing.
  
 
== How to use ==
 
== How to use ==
 
;At first please refer to the below [[#Manual|Manual]].
 
;At first please refer to the below [[#Manual|Manual]].
=== Initialize ===
+
{{How to use iODD}}
* Two sorts of the firmware are [[msen:NTFS|NTFS]] version and [[msen:FAT32|FAT32]]/[[wken:exFAT|exFAT]] version.
+
* NTFS firmware version is shipped.
+
* If you want [[msen:FAT32|FAT32]] or [[wken:exFAT|exFAT]] [[msen:Partition|Partition]], download and update the NTFS Firmware Updater.
+
* Follow the next steps
+
# Assemble the HDD or SSD with iODD
+
# Connect the iODD to PC
+
# Initialize the drive with [[wken:MBR|MBR]]
+
# Format the first partition with NTFS. (if the firmware is FAT then format with FAT32 or exFAT)
+
#* At FAT32 there is 4G byte file size limitation. please expert may use FAT32.
+
# Make ''_ISO'' folder in root folder.
+
# Create or Copy ''*.ISO *.VHD *.RMD *.IMA'' or sub folder tree to ''_ISO'' folder
+
# Do [http://windows.microsoft.com/en-US/windows7/Safely-remove-devices-from-your-computer safely remove] the iODD in OS. ( Very Important )
+
# If Power Down mode is on then release and reconnect the USB cable.
+
#* If not then press down the jog button in 3 seconds. and Power Down mode will be on.
+
#* and if ''Plug Out ...'' message is out, release and reconnect the USB cable.
+
# you will see Sequentially ''iodd 2531'' and a file name in root folder.
+
;If it is not like the above, follow the next
+
# Release the USB cable.
+
# Replace the HDD from iODD.
+
# Initialize the HDD with [[msen:GPT|GPT]] 로 초기화 한다.
+
# Go to [[#Initialize]](1, the first step) and retry (MBR -> GPT -> MBR).
+
  
=== Using Virtual USB Optical Drive (DVD-ROM or Blu-ray ROM) ===
+
== Manual ==
# 사용하려는 ISO 파일을 iODD 의 ''_ISO'' 폴더나 그 하위 폴더에 복사한다.
+
# OS 상에서 [http://windows.microsoft.com/ko-KR/windows7/Safely-remove-devices-from-your-computer 안전 제거]를 한다 (NTFS 일경우 필수)
+
# 만약 파워다운 모드로 들어가지 못했다면 조그 버튼을 아래로 3 초간 유지시켜서 파워다운 모드로 진입한다.
+
#* ''Plug Out ...'' 메세지가 나오면 USB 를 분리한다.
+
# 부팅 하려는 컴퓨터에 연결한후 전원을 켠다.
+
# (선택) 바이오스 모드에 들어가서 부팅 순서를 iODD 나 USB CD-ROM를 최우선으로 변경한다.
+
# (선택, 이미 상태가 저장 되었다면 스킵) 조그 버튼을 이용해서 ISO 파일을 선택한다.
+
#* 펌웨어 버전 1558 부터는 자동으로 로딩 상태가 저장되지만, 그 이전 버전은 조그버튼을 3초간 아래로 내려야 저장이 된다.
+
# 컴퓨터가 부팅 장치를 못찾을 경우 ''Ctrl-Alt-Del'' 을 눌러 재부팅 한다.
+
==== Troubleshooting ====
+
* Confirm the ISO file whether it is bootable.
+
* If your PC is old or does not provide multi LUN, please select ''CD-MODE'' in Menu.
+
* In order to confirm whether the ISO file is not good for booting, try to test it with the validated PC.
+
* Although bootable ISO file, it may not boot with iODD. test if it is same result with USB DVD-ROM.
+
* 만약 USB DVD-ROM 에서 부팅이 되는데 iODD 에서 부팅이 되지 않으면 USB Y-CABLE 을 사용하여 외부전원을 사용한다.
+
* 내부 DVD-ROM이 있는 맥북이나 노트북에서 부팅이 되지 않을경우 바이오스 모드로 들어가서 내부 DVD-ROM을 디세이블 시킨다.
+
  
=== 가상 USB 고정식 드라이브 (Virtual Hard Disk) 이용 ===
+
*[http://dir.iodd.kr/iodd2531/manual Iodd-2531 Quick Guide (07/2016)]
* 고정식 VHD 파일을 이용한다. (가변식 이나 VHDx 형태는 안된다)
+
*[http://dir.iodd.kr/iodd253141-manual Iodd-2531 Guide (07/2016)]
* 이 방법을 이용하면 고정식 USB 드라이브로 인식된다.
+
*[http://dir.iodd.kr/vhd_tools Iodd Virtual Drive Guide]
* VHD 파일은 [[VHD Tool++]] 를 이용해서 iODD에 직접 만든다. (이 툴을 이용하면 VHD 파일에 물리적으로 디스크 조각이 없이 만들어진다)
+
* 조그 버튼으로 VHD 파일을 선택하면 iODD가 재부팅 되면서 iODD 는 자동으로 ''CD-MODE'' 가 되고 선택한 VHD 로 가상 드라이브가 인식된다.
+
* ''DUAL-MODE'' 와 ''Write Protect''(쓰기방지) 유무를 지정하고 싶다면 VHD 파일이름을 변경하면 된다. [[VHD Tool++]] 참조.
+
* 최대 4개의 가상 드라이브를 동시에 선택할수 있다. (파일 하나 선택후에 3초 안으로 다른 파일을 선택함)
+
# [[VHD Tool++]] 를 이용하여 iODD 의 ''_ISO'' 폴더 밑에 만든다.
+
# 완료되면 OS 상에서 [http://windows.microsoft.com/ko-KR/windows7/Safely-remove-devices-from-your-computer 안전 제거]를 한다 (NTFS 일경우 필수)
+
# 부팅 하려는 컴퓨터에 연결한후 전원을 켠다.
+
# (선택, 이미 상태가 저장 되었다면 스킵) 조그 버튼을 이용해서 VHD 파일을 선택한다.
+
# (선택) 바이오스 모드에 들어가서 부팅 순서를 iODD 나 USB Drive를 최우선으로 변경한다.
+
# 컴퓨터가 부팅 장치를 못찾을 경우 ''Ctrl-Alt-Del'' 을 눌러 재부팅 한다.
+
  
=== 가상 USB 이동식 플레시 메모리 (Virtual USB Flash Drive) 이용 ===
+
<!--
* 위의 VHD 활용 방법과 거의 같고 단지 파일명만 RMD 로 수정하면 된다.
+
*[http://dir.iodd.kr/iodd2531/manual/iODD-2531_Quick_Start_Guide_(EN).jpg iODD-2531 Quick Guide (07/2016)]
* 이 방법을 이용하면 이동식 USB 드라이브로 인식된다.
+
*[http://dir.iodd.kr/2541/manual/iodd_virtual_USB_drive_guide_0425.pdf iODD Virtual HDD Drive Guide]
 +
*[http://dir.iodd.kr/iodd2531/manual/IODD_MANUAL_EN.pdf iODD-2531-2541 Manual (07/2016)]
 +
*[http://dir.iodd.kr/iodd2531/manual/iodd2531_quick_guide_en_V1.2.01.pdf iODD-2531 Manual]
 +
-->
  
=== 가상 플로피 (Virtual FDD) 이용 ===
+
== Messages ==
* 모든 컴퓨터에서 이 방법이 지원 되는것이 아닙니다.
+
: If LCD message shows like the followings
* 비압축 플로피 이미지 IMA, IMG, BIF, VFD 사용 가능합니다.
+
=== Status Messages ===
* IMG, BIF, VFD 이미지는 IMA 확장자로 변경해야 합니다.
+
# <span class="notranslate">'''"Please Wait"'''</span> - please wait
* 사용방법은 위의 ISO 사용방법과 비슷합니다.
+
# <span class="notranslate">'''"Plug Out ..."'''</span> - please disconnect
 +
# <span class="notranslate">'''"Data Saving..."'''</span> - please wait for saving data
 +
# <span class="notranslate">'''"Flash Update..."'''</span> - please wait for updating flash
  
== 매뉴얼 ==
+
=== Error Messages ===
*[ftp://sps.iodd.kr/filebase/2531/manual/iODD-2531_Quick_Start_Guide_(KO).jpg iODD-2531 퀵 가이드]
+
<!-- {{Iodd Error Messages}} -->
*[ftp://sps.iodd.kr/filebase/2541/manual/iodd_virtual_USB_drive_guide_0425_KO.pdf iODD 가상 하드 드라이브 가이드]
+
*[ftp://sps.iodd.kr/filebase/2531/manual/ko_guide_iodd2531.pdf iODD-2531 매뉴얼 (A/S 주소 틀림)]
+
 
+
== 문제해결 ==
+
=== 에러메세지 ===
+
 
<div class="toccolours mw-collapsible mw-collapsed" style="max-width:800px" >
 
<div class="toccolours mw-collapsible mw-collapsed" style="max-width:800px" >
화면에 ''ChkDsk (아니면 gErr) : xxx'' 라고 출력됩니다.
+
<span class="notranslate">'''"ChkDsk (or gErr) : xxx"'''</span> - Check Disk. or Error Code
 
<div class="mw-collapsible-content">
 
<div class="mw-collapsible-content">
:증상이 해결될 때까지 다음 순서에 따라 하나씩 실행하여 주십시오.
+
Do [[#First Aid|First Aid]]
# 조그 스위치를 누른 상태로 PC와 연결하세요.
+
# 윈도우에서 디스크 검사를 진행하세요.
+
# 새로운 _ISO폴더를 생성하고 자료를 하나씩 복사해서 증상을 확인합니다.(기존의 _ISO폴더는 이름을 바꾸세요, 이동이 아니라 복사입니다)
+
# 동일한 증상이 반복된다면 데이터를 백업한 후 HDD를 포맷하여 주세요.
+
# 최신 펌웨어로 업데이트 해 주세요.
+
 
</div> </div>
 
</div> </div>
  
<div class="toccolours mw-collapsible mw-collapsed" style="max-width:800px" >
+
{{Iodd Error Messages}}
화면에 ''1st partition'' 또는 ''unsupported partition'' 이라고 나옵니다.
+
<div class="mw-collapsible-content">
+
:펌웨어 종류와 iODD 드라이브의 첫번째 파티션과 맞지 않아서 일어나는 메시지 입니다.
+
:위의 [[#처음 세팅|처음 세팅]] 을 확인하세요
+
</div> </div>
+
  
 +
<!--
 
<div class="toccolours mw-collapsible mw-collapsed" style="max-width:800px" >
 
<div class="toccolours mw-collapsible mw-collapsed" style="max-width:800px" >
''bad or N/S HDD''
 
<div class="mw-collapsible-content">
 
하드 디스크를 읽지 못하는 경우 입니다.
 
증상이 반복되면 다른 하드 디스크로 교환하세요
 
</div> </div>
 
  
<div class="toccolours mw-collapsible mw-collapsed" style="max-width:800px" >
 
''too many files''
 
 
<div class="mw-collapsible-content">
 
<div class="mw-collapsible-content">
루트 디렉토리나 _ISO폴더안에 32개 이상의 파일/폴더가 있을때 발생하는 메시지 입니다.
 
서브 폴더를 사용해서 자료를 정리하세요
 
</div> </div>
 
  
<div class="toccolours mw-collapsible mw-collapsed" style="max-width:800px" >
 
''NO _ISO Folder''
 
<div class="mw-collapsible-content">
 
iODD 드라이브의 첫번째 파티션의 루트 폴더에 ''_ISO'' 폴더를 만드세요
 
 
</div> </div>
 
</div> </div>
 +
-->
  
 +
=== FAQ ===
 
<div class="toccolours mw-collapsible mw-collapsed" style="max-width:800px" >
 
<div class="toccolours mw-collapsible mw-collapsed" style="max-width:800px" >
''NO - DISC''
+
iODD does not boot
 
<div class="mw-collapsible-content">
 
<div class="mw-collapsible-content">
''_ISO'' 폴더 에 서브폴더나 이미지 파일이 없는 경우 입니다.
+
Refer to [[#Booting Error|Booting Error]]
 
</div> </div>
 
</div> </div>
  
 
<div class="toccolours mw-collapsible mw-collapsed" style="max-width:800px" >
 
<div class="toccolours mw-collapsible mw-collapsed" style="max-width:800px" >
''Check HDD''
+
The LCD displays <span class="notranslate">"IODD 2531"</span> only.
 
<div class="mw-collapsible-content">
 
<div class="mw-collapsible-content">
NTFS 인경우 [http://windows.microsoft.com/ko-KR/windows7/Safely-remove-devices-from-your-computer 안전 제거]를 안하고 드라이브를 제거하면 캐시 데이터를 저장하지 못했을때고 발생합니다.
+
Do [[#First Aid|First Aid]]
이 경우 재연결 하면 증상이 없어질수 있는데 그렇지 않으면 [[msko:디스크 오류 검사|디스크 오류 검사]]를 해보세요
+
 
</div> </div>
 
</div> </div>
  
 
<div class="toccolours mw-collapsible mw-collapsed" style="max-width:800px" >
 
<div class="toccolours mw-collapsible mw-collapsed" style="max-width:800px" >
''Disc Locked''
+
If mount Virtual Drive (VHD, RMD, IMA), then the main mode will be changed to ''CD-MODE'' automatically . If i change to ''DUAL-MODE'', then the disk is write protected.
 
<div class="mw-collapsible-content">
 
<div class="mw-collapsible-content">
OS 나 프로그램이 실행하면서 광드라이브를 어떤이유로 락킹 시킨상태 입니다.
+
:You can change this by changing file name. refer to [[VHD Tool++]]
디스크가 수동으로 빠지지 않게 되는데, 해결책은 iODD 를 재연결 하면 됩니다.
+
 
</div> </div>
 
</div> </div>
  
 
<div class="toccolours mw-collapsible mw-collapsed" style="max-width:800px" >
 
<div class="toccolours mw-collapsible mw-collapsed" style="max-width:800px" >
''DEFRAG''
+
I want to release the Virtual drives (VHD, RMD, IMA) that mounted.
 
<div class="mw-collapsible-content">
 
<div class="mw-collapsible-content">
ISO 파일은 24의 디스크 조각까지 허용되며, VHD 나 RMD 는 조각을 허용하지 않습니다.
+
* Try one of the following steps
그 이상이 될경우에는 [[wkko:단편화 제거| 디스크 단편화 제거]]를 위해 [[wkko:디스크_조각_모음_(윈도우)|디스크 조각 모음]]을 실행해 주세요.
+
# press the button next to USB connector for 3 seconds. ( Firmware 1555 + )
 +
# <span class="notranslate">''Menu''->''Advanced''->''Umount VHDD''</span>
 
</div> </div>
 
</div> </div>
  
 
<div class="toccolours mw-collapsible mw-collapsed" style="max-width:800px" >
 
<div class="toccolours mw-collapsible mw-collapsed" style="max-width:800px" >
''vDISK Limit''
+
The Firmware update has repeatedly failed
 
<div class="mw-collapsible-content">
 
<div class="mw-collapsible-content">
최대 4개의 가상 드라이브를 지원하는데, 그 이상 선택했습니다.
+
Please refer to [[#How to update|How to update]]
</div> </div>
+
 
+
<div class="toccolours mw-collapsible mw-collapsed" style="max-width:800px" >
+
''Already Hit''
+
<div class="mw-collapsible-content">
+
이미 선택된 가상 드라이브를 다시 선택했습니다.
+
</div> </div>
+
 
+
<div class="toccolours mw-collapsible mw-collapsed" style="max-width:800px" >
+
''No Use  Dynamic''
+
<div class="mw-collapsible-content">
+
선택한 VHD는 가변식 입니다. 고정식만 지원합니다.
+
</div> </div>
+
 
+
<div class="toccolours mw-collapsible mw-collapsed" style="max-width:800px" >
+
''No Use  Sparse''
+
<div class="mw-collapsible-content">
+
가상 드라이브 이미지는 sparse 파일을 지원 하지 않습니다.
+
 
</div> </div>
 
</div> </div>
  
Line 219: Line 141:
 
-->
 
-->
  
=== QNA ===
+
== Firmware ==
<div class="toccolours mw-collapsible mw-collapsed" style="max-width:800px" >
+
# There are 2 types of iODD's Firmware.
화면에 IODD 2531만 출력됩니다.
+
# FAT version - <span class="notranslate">Fat32, exFAT</span>.
<div class="mw-collapsible-content">
+
# NTFS version - supports NTFS.
:하드웨어 문제인 경우이며 다음중 하나를 실행하세요
+
* 조그버튼을 누르고 USB 케이블을 연결한다음 3초간 유지합니다.
+
* USB포트를 PC의 후면에 꽃습니다.(PC의 전면 전압이 낮은경우)
+
* USB케이블을 교체합니다.(스마트폰에 사용되는 5핀 케이블도 테스트로 사용할 수 있습니다)
+
* PC를 재부팅 합니다.
+
* HDD를 교체합니다. ( HDD에서 소리가 나거나 문제가 있는경우).
+
* 만약 USB허브를 사용하고 있다면,허브를 사용하지 말고 PC에 아이오드를 직접 연결합니다.
+
* 다른 PC에 연결해 봅니다.
+
* 위의 처방에도 이 현상이 지속된다면 A/S 접수 해주세요
+
</div> </div>
+
  
<div class="toccolours mw-collapsible mw-collapsed" style="max-width:800px" >
+
=== How to update ===
가상 드라이브 (VHD, RMD, IMA)를 마운트 하면 자동으로 ''CD-MODE'' 로 되고 ''DUAL-MODE'' 로 변경하면 쓰기 금지가 됩니다.
+
{{iODD Firmware Update}}
<div class="mw-collapsible-content">
+
:파일명을 변경하면 됩니다. [[VHD Tool++]] 참조 바랍니다.
+
</div> </div>
+
  
<div class="toccolours mw-collapsible mw-collapsed" style="max-width:800px" >
+
=== Latest ===
가상 드라이브 (VHD, RMD, IMA) 마운트를 해제하고 싶습니다.
+
* [http://dir.iodd.kr/iodd_firmware_updater Download]
<div class="mw-collapsible-content">
+
* 다음중 하나를 실행하세요
+
# USB 커넥터 옆의 기능 버튼을 길게 누른다 ( 펌웨어 1555 이상 )
+
# ''Menu''->''Advanced''->''Umount VHDD''
+
</div> </div>
+
 
+
<div class="toccolours mw-collapsible mw-collapsed" style="max-width:800px" >
+
펌웨어 업데이트가 자꾸 실패합니다.
+
<div class="mw-collapsible-content">
+
[[#업데이트 방법|업데이트 방법]] 을 확인하세요
+
</div> </div>
+
 
+
<!--
+
<div class="toccolours mw-collapsible mw-collapsed" style="max-width:800px" >
+
 
+
<div class="mw-collapsible-content">
+
 
+
</div> </div>
+
-->
+
  
== 펌웨어 ==
+
=== Archives ===
=== 업데이트 방법 ===
+
{{틀:iODD 업데이트 방법}}
+
  
=== 최신 ===
+
* 2017. 7. 14 - [http://dir.iodd.kr/iodd2531/ntfs/iODD_2531_user_fw_writer_04(R1600N)_x86.zip NTFS Version 1600], [http://dir.iodd.kr/iodd2531/fat/iODD_2531_user_fw_writer_04(R1600F)_x86.zip FAT32/exFAT Version  1600]
* 2016. 4. 23 - [ftp://sps.iodd.kr/filebase/2531/ntfs/iODD_2531_user_fw_writer_04(R1558N)_x86.zip NTFS 버전 1558], [ftp://sps.iodd.kr/filebase/2531/fat/iODD_2531_user_fw_writer_04(R1558F)_x86.zip FAT32/exFAT 버전 1558]
+
:LCD Visibility improvement
:''Menu'' -> ''Advanced''->''Instant Save'' 기능추가
+
:체크 되어있으면 ISO 파일 선택시 로딩정보 바로 저장
+
  
=== 이전 ===
+
* 2016. 4. 23 - [http://dir.iodd.kr/iodd2531/ntfs/iODD_2531_user_fw_writer_04(R1558N)_x86.zip NTFS Version 1558], [http://dir.iodd.kr/iodd2531/fat/iODD_2531_user_fw_writer_04(R1558F)_x86.zip FAT32/exFAT Version  1558]
* 2016. 3. 28 - [ftp://sps.iodd.kr/filebase/2531/ntfs/iODD_2531_user_fw_writer_04(R1555N)_x86.zip NTFS 버전 1555], [ftp://sps.iodd.kr/filebase/2531/fat/iODD_2531_user_fw_writer_04(R1555F)_x86.zip FAT32/exFAT 버전 1555]
+
:Add Menu option : ''Menu'' -> ''Advanced''->''Instant Save''
:VHD, RMD 모드에서 Rufus 프로그램 지원
+
:If checked, when you select an ISO file the loading information will be saved instantly.
* 2014. 6. 2 - [ftp://sps.iodd.kr/filebase/2531/ntfs/iODD_2531_user_fw_writer_04(R1288N)_x86.zip NTFS 버전 1288], [ftp://sps.iodd.kr/filebase/2531/fat/iODD_2531_user_fw_writer_04(R1288F)_x86.zip FAT32/exFAT 버전 1288]
+
* 2016. 3. 28 - [http://dir.iodd.kr/iodd2531/ntfs/iODD_2531_user_fw_writer_04(R1555N)_x86.zip NTFS Version 1555], [http://dir.iodd.kr/iodd2531/fat/iODD_2531_user_fw_writer_04(R1555F)_x86.zip FAT32/exFAT Version 1555]
:장기 안정 펌웨어
+
:VHD, RMD are now supported with Rufus.
 +
* 2014. 6. 2 - [http://dir.iodd.kr/iodd2531/ntfs/iODD_2531_user_fw_writer_04(R1288N)_x86.zip NTFS Version 1288], [http://dir.iodd.kr/iodd2531/fat/iODD_2531_user_fw_writer_04(R1288F)_x86.zip FAT32/exFAT Version 1288]
 +
:Long-term stable version

Latest revision as of 08:09, 8 July 2021


Appearance

Functions

  1. Bootable Virtual CD-ROM, DVD-ROM, Blu-ray Drive
    • There is no need to buy DVD-ROM and blank media for OS installation.
    • ISO (CD, DVD, Blu-ray) is supported.
  2. Bootable Virtual USB Drive and Flash Drive.
    • iODD supports OS installation and Multi Booting. (and "Windows-To-Go")
    • Virtual Disk Drive - can do all functions as USB Flash Drive can do
    • VHD and VMDK (Virtual Disk Drive), RMD (Virtual Flash Drive), IMA (Virtual Floppy Disk Drive) are supported.
  3. Multi LUN
    • max 1 optical drive, 1 hard drive, 4 virtual drives are supported at the same time.
  4. hotkey for safely removal.
    • The last physical safeguard. this key provides the safe removal.
  5. Write Protection
    • The last logical safeguard. I keep my drive. Good bye Virus.
    • Optional Write Blocker. (Hard wired)
  6. Real-time AES 256-bit XTS Military Grade Encryption ( iODD-2541 )
    • 4-15 Pin digits. 6 digits is enough for protecting your data. (against the developer of iODD-2541)
    • All functions work well with Encryption
    • Encryption is optional. you can use without encryption.
  7. Maintain Loading State
    • Save and maintain the loading state and menu for next boot.

Menu

  1. Mode-Select - Define USB devices mode
    1. Dual Mode - 1 Disk Drive and 1 Optical Disk Drive
    2. HDD Mode - 1 Disk Drive
    3. CD Mode - 1 Optical Disk Drive
  2. Setting - Settings
    1. LCD Bright - adjusts LCD back-light brightness
    2. Idle Bright - adjusts LCD back-light brightness in power saving mode
    3. Standby time - adjusts the inactive time before power saving mode is active
    4. Load Default - restores all settings to their default values
  3. Information - Information
    1. S.M.A.R.T. - informs the following status of the internal Disk Drive
      1. HDD Temp - Disk Drive Temperature
      2. HDD Health - Disk Drive Health
    2. HDD Model - Disk Drive Model
    3. HDD Serial - Disk Drive Serial
    4. Firmware Ver - iODD's Firmware Version
    5. USB Speed - Currently connected USB Speed
    6. USB Input Volt - USB BUS voltage (Also Minimum )
  4. USB Connect - USB Settings
    1. Refreah - Reconnect the iODD
    2. Safe Removal - stops the spindle motor and goes to power saving mode
  5. Advanced - Advanced Settings
    1. Umount VHDD - Umounts All the Virtual Disk Drives
    2. Write Protect - Write-Protection for the Drive.
      • If virtual drive is mounted, this option applies to the virtual drive. (not optical drive)
    3. Instant Save - Instant Save
    4. Force USB 3.0 - Preserves USB 3.0 Connection in harsh conditions

Specifications

  1. External Interface - USB 1.1 / 2.0 / 3.0 (MAX 5G bps)
  2. Internal Interface - SATA I / II / III (Backward Compatible)
  3. 2.5 Inch HDD, SSD (9.5mm width) can be installed. 4TB+
    • If using IODD functions, Max 2TB partition can be used. Regardless of the disk size.
    • 7mm disk drive requires a spacer.
  4. 3-way jog dial, Back Button, USB 3.0 micro B-Type connector.
  5. LCD - 128 * 32 dots.
  6. Material - Aluminum, PC (Plastic).
  7. almost same as ZM-VE300. same architecture. improved hardware. Firmware updates continuing.

How to use

At first please refer to the below Manual.

Basic function

iODD's Sample Folder Tree

create a folder named "_ISO" at root folder.
This folder tree is an example.
Any file name and folder name under "_ISO" is acceptable
J:
├─ _ISO
│  │  Hiren’s BootCD 15.2.iso
│  │  ubuntu-14.04.4-desktop-amd64.iso
│  │  Windows 10.iso
│  │  Windows XP sp3.iso
│  │  (max 32 files or subfolders in a folder)
│  │  
│  ├─IMA for Floppy
│  │      Bios updater.ima
│  │      MS-DOS 6.0.ima
│  │      Symantec Ghost.ima
│  │      
│  ├─RMD for Setup
│  │      Win 7Ent_x86_x64+8.1Pro+10Pro vol2.RMD
│  │      Win7_Ult_SP1_Russian_x64.RMD
│  │      Windows 10.RMD
│  │      
│  └─VHD for Booting
│      │  linuxmint-17.3-cinnamon-32bit.vhd
│      │  Windows 10 Win2Go.vhd
│      │  Windows 7 OS Booting.vhd
│      │  
│      └─Nested Subfolders is allowed
├─Your Folder 01
├─Your Folder 02
├─Your Folder 99
│  Your files 01.txt
│  Your files 02.txt
│  Your files 99.txt

2531 Keys

  1. Browsing
    • Jog Dial Up/Down. - list Up/Down.
    • Jog Dial push. - Select a file.
    • BackUp push. - Go to parent folder.
  2. Menu
    • Jog Dial push for 3 seconds. - To enter to Menu mode.
    • BackUp push. - To exit.
  3. Long key ( push for 3 seconds )
    • Jog Dial lift up. - refresh the file lists
    • Jog Dial get down. - Go to Power Saving State
    • Jog Dial push. - enter to Menu mode
    • BackUp push. - Reboot. and detach all virtual drives (VHD, RMD, IMA)
  4. Startup Keys (during startup)
    • Jog-Dial lift up. - Start up with CD-MODE
    • Jog-Dial get down. - Start up with HDD-MODE
    • Jog Dial push. - reset the loading state. Start up with DUAL-MODE
    • BackUp push. - Start up with Write-Protected mode.

2541 Keys

  1. Browsing
    • Up/Down list - 2 / 8
    • Select a file - 5 (or 6, for maintaining loading state)
  2. Menu
    • Menu - to enter to Menu. (or Exit).
    • 4 - Go to upper list
  3. Long key ( push for 3 seconds )
    • 1 - Go to Power Saving State
    • 3 - reboots iODD
    • 4 - refreshes file lists
    • 7 - Reboot. and detach all virtual drives (VHD, RMD, IMA)
    • 0 - Reboot. and temporarily disable Write-Protection
  4. There is not Startup key

Go to Power Saving State

Power Saving State : Spindle motor is stopped and LCD brightness is low.
CD loading state is saved.
  • Jog Dial. down for 3 seconds. (2531).
  • 1. push for 3 seconds. (2541).

Selecting a file

In order to maintain loading state, you must save the state.
refer to the above key operations.
  • (2531) #2531 Keys
    • If Firmware version is 1558 or higher, loading state is automatically saved.
    • If not, you must save it manually. (Go to Power Saving State)
  • (2541) #2541 Keys
    • If Firmware version is lower than 6(7)9-05, button 6 has no function.

Safely Removal In OS

If iODD's partition is NTFS, then this function is mandatory when disconnecting iODD from host.
NTFS does not write Immediately the data to HDD.
  • Please do Safely Removal before disconnection.
  • If iODD is in write-protected mode and an error message appears, then disable write-protect option. and retry this function.

Initialization

  • the firmware is two sorts. (NTFS type, FAT32/exFAT type)
  • NTFS firmware version is shipped.
  • If you use FAT32 or exFAT Partition, then run FAT Firmware Updater. (FAT32 exFAT Partition)
  • follow the next steps
  1. assemble the HDD or SSD with iODD
  2. connect the iODD to PC
  3. initialize the drive to MBR. (wken:MBR)
  4. Format the first partition as NTFS. (if the firmware is FAT, then format it as FAT32 or exFAT)
    • In FAT32 partition there is 4G byte file size limitation. please use that carefully.
  5. create "_ISO" folder in root folder. (not case sensitive)
  6. copy ISO file to "_ISO" folder. (or create VHD RMD IMA files)
  7. safely remove iODD. ( very Important if NTFS). (safely remove).
  8. If Power Saving mode is active, then disconnect and reconnect the USB cable.
  9. The following messages will appear sequentially in LCD
    • "iodd 253(4)1"
    • a file name

Initialize All

If Initialization fails, follow the next steps
  1. disconnect the USB cable.
  2. remove the HDD from iODD. and Connect directly it to PC.
  3. Initialize it to GPT. (msen:GPT)
  4. redo Initialization (from the first step). (your HDD is initialized as MBR -> GPT -> MBR).
  5. Open back cover
  6. Press tact switch
  7. Connect USB cable
  8. Wait 7 seconds
  9. Release tact switch
  10. Wait 1 minutes
  11. All done

First Aid

If it has failure suddenly, try one of the following steps until the error is clear
  1. (2531). press the Jog Dial and hold. and then connect iODD to PC. (#2531 Keys. refer to Startup Keys)
  2. try Safely Removal In OS.
  3. Check Disk for iODD ( for Windows)
  4. Rename "_ISO" folder name to other name. create new folder named "_ISO". and copy files to this folder. (not moving)
  5. Update it with the latest firmware.
  6. Backup the data of iODD, and Initialize All
If there is hardware problem
  1. Reboot the PC
  2. Please change USB cable
  3. Connect iODD to the port of PC back panel.
  4. Try it on another pc
  5. Please change the HDD.

Using a Virtual USB Optical Drive (DVD-ROM or Blu-ray ROM)

  1. copy ISO files to "_ISO" folder. (or to subfolder)
  2. Safely Remove. (Required for NTFS )
  3. If Power Saving mode is not active , then Go to Power Saving State
    • If "Plug Out ..." (or "Plug Out ...") message appears, disconnect the iODD.
  4. Connect iODD to a PC. and power on the PC.
  5. (Optional) select iODD or USB CD-ROM as the first priority of BOOT order in BIOS.
  6. If a file has not been selected, then select an ISO file. Selecting a file
  7. If PC doesn't find boot device, then reboot the PC. (Ctrl-Alt-Del)

Booting Error

  • Confirm whether the ISO file is bootable.
  • If your PC does not support multi LUN, please select CD-MODE (or ODD-MODE).
  • In order to confirm whether the ISO file is able to boot, please try to test it with the validated PC.
  • Although it is bootable ISO file, please confirm whether the result with a real USB DVD-ROM is the same
  • If the ISO file can be boot with USB DVD-ROM, then use USB Y-CABLE for adding external power.
  • If your laptop has own internal DVD-ROM, please disable internal DVD-ROM at BIOS settings. or remove it.
  • The older OS than motherboard may not have an appropriate driver to boot.
    • ex) It is impossible to install a genuine Windows 7 on Skylake platform using USB DVD-ROM device.

Using a Virtual USB fixed disk drive (Virtual Hard Disk)

  • Fixed-size VHD file only is supported. (dynamic VHD and VHDx files are not supported)
  • Also fixed VMDK file is supported.
  • Create VHD files directly to iODD by "VHD Tool++". ("VHD Tool++" can creates a file without fragment)
  • You can create VMDK by changing file extension. (VHD -> VMDK).
  • If you select a VHD file, then iODD will be rebooted with CD-MODE. and it will be recognized as a USB disk drive.(Selecting a file).
  • If you want to change to DUAL-MODE or to change Write Protection option, rename the VHD filename. refer to "VHD Tool++"
  • Max 4 Virtual Drives are supported at the same time ( Successive selection within 3 seconds)
  1. create a VHD file using a tool. (VHD Tool++).
  2. If successful, safely remove iODD from OS. (#Safely Removal In OS. Very Important to NTFS.)
  3. If Power Saving mode is not active, then Go to Power Saving State
    • If "Plug Out ..." (or "Plug Out ...") message appear, disconnect the iODD.
  4. Connect iODD to a PC. and power on the PC.
  5. (Optional) select iODD or USB Device as the first priority of BOOT order in BIOS.
  6. If a file has not been selected, then select a VHD file. (Selecting a file)
  7. If PC doesn't find boot device, then reboot the PC. (Ctrl-Alt-Del)

Using a Virtual USB Removable Flash Drive (Virtual USB Flash Drive)

  • Almost the same as the above method. (Using a Virtual USB fixed disk drive)
  • But the file extension must be changed. "VHD" -> "RMD"

Using a Virtual USB Floppy Drive (Virtual FDD)

  • This method is not supported on some computers.
  • Uncompressed floppy image IMA, IMG, BIF, VFD are supported.
  • IMG, BIF, VFD image file extension must be renamed to IMA.
  • Almost the same as the above method.

Manual


Messages

If LCD message shows like the followings

Status Messages

  1. "Please Wait" - please wait
  2. "Plug Out ..." - please disconnect
  3. "Data Saving..." - please wait for saving data
  4. "Flash Update..." - please wait for updating flash

Error Messages

"ChkDsk (or gErr) : xxx" - Check Disk. or Error Code

"Check HDD" - Check HDD

"1st partition" or "unsupported partition" - Partition Mismatch with Firmware

  • This error occurs if the firmware type does not match the first partition of iODD.
  • Please Check the above Initialization.

"bad or N/S HDD" - bad or not supported partition

  • This error occurs when iODD can not read the internal HDD.
  • Please change the HDD or USB cable.

"Too Many Files" - too many files in a folder

  • iODD allows max 32 files or sub folders in a folder. (under "_ISO" folder)
  • Split a folder into subfolders.

"NO _ISO Folder" - there is no folder named "_ISO".

  • create a folder named "_ISO" at root folder.

"NO - DISC" - there is no files in "_ISO" folder

  • there is not a file or sub folder in _ISO folder.

"Disc Locked" - Disc is locked

  • The OS or a application has locked the ODD drive at any reasons.

"DEFRAG" - defrag

"vDISK Limit" - the number of virtual drives is more than limit

  • The max number of Virtual disk drives is 4.
  • You can not select more than 4 Virtual drives.

"Already Hit" - already selected

  • You can not select the file that have been selected already.

"No Use Dynamic" - not supported dynamic VHD

  • The VHD file selected is Dynamic VHD file. fixed VHD is only supported.

"No Use Sparse" - not supported sparse file

  • The sparse image file is not supported as Virtual Drive.


FAQ

iODD does not boot

Refer to Booting Error

The LCD displays "IODD 2531" only.

If mount Virtual Drive (VHD, RMD, IMA), then the main mode will be changed to CD-MODE automatically . If i change to DUAL-MODE, then the disk is write protected.

You can change this by changing file name. refer to VHD Tool++

I want to release the Virtual drives (VHD, RMD, IMA) that mounted.

  • Try one of the following steps
  1. press the button next to USB connector for 3 seconds. ( Firmware 1555 + )
  2. Menu->Advanced->Umount VHDD

The Firmware update has repeatedly failed

Please refer to How to update


Firmware

  1. There are 2 types of iODD's Firmware.
  2. FAT version - Fat32, exFAT.
  3. NTFS version - supports NTFS.

How to update

Requirements : PC ( Windows OS, USB Port)
Warning - You must connect only one iODD device.
Please update the exact firmware matching the first partition of iODD.
If you update wrong firmware, retry the updater with correct firmware.
  1. Download the below firmware file.
  2. Uncompress the zip file to proper folder.(Do not run it within zip file)
  3. Run the EXE file.
  4. If "Device is Detected" message appears, then press "Update" button.
    • If not, follow the next steps
    • Use another PC.
    • Change the USB cable.
    • (for 2541.) Press the Reset button and hold, and connect the iODD. and hold the button for 1 second. and run the firmware updater.(this reset button is on the main PCB inside iODD.)
    • (for 2531.) Press the Reset button and hold, and connect the iODD. and hold the button until USB detection (for about 5 seconds). and run the firmware updater.(this reset button is on the main PCB inside iODD.)
  5. If it is successful, then press "Exit" button. and reconnect iODD.

Latest

Archives

LCD Visibility improvement
Add Menu option : Menu -> Advanced->Instant Save
If checked, when you select an ISO file the loading information will be saved instantly.
VHD, RMD are now supported with Rufus.
Long-term stable version