Template:IODD Firmware Update
From iODD
Revision as of 17:36, 23 May 2016 by Kbs (Talk | contribs) (Created page with ": Requires : A PC that have Windows OS and USB Port. : '''Warning''' - You Must connect only '''one iODD device''' : Please update the exact firmware matching the first partit...")
- Requires : A PC that have Windows OS and USB Port.
- Warning - You Must connect only one iODD device
- Please update the exact firmware matching the first partition of iODD.
- If you update wrong firmware, retry the update with correct firmware.
- Download the below firmware file.
- Uncompress the zip file to proper folder.(Do not run it within zip file)
- Run the EXE file.
- Device is Detected message appears and press Update button.
- If not, follow the next steps
- Use another PC.
- Change the USB cable.
- Press the Reset button and hold, and connect the iODD, and hold until iodd 25x1 appears in LCD. and Update.(This button is on the main PCB inside iODD)
- If successful, Press Exit button. and reconnect iODD.
