Template:How to use iODD

Power Down State : Spindle motor is stopped and LCD bright is low.

Side effect : CD loading state is saved.

(2531) Navigate files by Jog-Dial Up/Down. Select(Mount) a file by pressing Jog-Dial.
(2541) Navigate files by Up/Down (2/8) button. Select(Mount) a file by pressing 5 or 6 (instantly save loading state).

Two sorts of the firmware are NTFS version and FAT32/exFAT version.
NTFS firmware version is shipped.
If you want FAT32 or exFAT Partition, download and update the NTFS Firmware Updater.
Follow the next steps

Assemble the HDD or SSD with iODD
Connect the iODD to PC
Initialize the drive with MBR
Format the first partition with NTFS. (if the firmware is FAT then format with FAT32 or exFAT)
- At FAT32 there is 4G byte file size limitation. please expert may use FAT32.
Make _ISO folder in root folder. (not sensitive)
Create or Copy *.ISO *.VHD *.RMD *.IMA or sub folder tree to _ISO folder
Do safely remove the iODD in OS. ( Very Important to NTFS)
If Power Down mode is active then release and reconnect the USB cable.
- If not, then #Go to Power Down State
- and if Plug Out ... message is out, release and reconnect the USB cable.
you will see sequentially iodd 25*1 and a file name in root folder.

Copy your ISO files to _ISO folder or sub folder.
Do Safely Remove in your OS. (necessary in NTFS )
If Power Down mode is not active , then #Go to Power Down State
- If Plug Out ... message is out, release the iODD.
Connect iODD to the PC to boot and power on the PC.
(Optional) Make iODD or USB CD-ROM the first in the priority of BOOT sequence in BIOS.
(Not required if an ISO has been selected) Select a ISO file by #Selecting a file
- If Firmware version is 1558 or higher then loading status is automatically saves. if not, you must save it manually by #Go to Power Down State
If PC don't find booting device (iODD), then Press Ctrl-Alt-Del to reboot.

Confirm the ISO file whether it is bootable.
If your PC is old or does not provide multi LUN, please select CD-MODE (or ODD-MODE) in Menu.
In order to confirm whether the ISO file is not good for booting, try to test it with the validated PC.
Although it is bootable ISO file, it may not boot with USB DVD-ROM. test if it is same result with USB DVD-ROM.
If It can boot in USB DVD-ROM and can not boot in iODD, please use USB Y-CABLE for adding external power.
If your laptop has own internal DVD-ROM and iODD does not boot, please disable internal DVD-ROM at booting device list on BIOS settings or remove it.

Only fixed VHD file is supported. (Not dynamic VHD nor VHDx files)
Make VHD files directly by VHD Tool++. (VHD Tool++ can make a file without fragment)
Select VHD file (#Selecting a file) and iODD will be rebooted with CD-MODE and is recognized as USB disk drive (Virtually).
If you want DUAL-MODE or to change Write Protect option, rename the VHD file. Refer to VHD Tool++
Max 4 Virtual Drive is supported at the same time ( Successive selection within 3 seconds)

Create a VHD file with using VHD Tool++ at _ISO folder
If successful, Do safely remove the iODD in OS. ( Very Important to NTFS)
If Power Down mode is not active, then #Go to Power Down State
- If Plug Out ... message appear, release the iODD.
Connect iODD to your PC and power on the PC.
(Optional) Make iODD or USB CD-ROM the first in the priority of BOOT sequence in BIOS.
(Not required if a VHD has been selected) Select a VHD file #Selecting a file.
- If Firmware version is 1558 or higher then loading status is automatically saves. if not, #Go to Power Down State
If PC don't find booting device (iODD) then Press Ctrl-Alt-Del to reboot.

Almost the same as the above method (Using VHD) only if the file name extension is modified by RMD.

Contents