Difference between revisions of "Template:How to use iODD"

Revision as of 17:31, 2 June 2016

Basic function

iODD's Sample Folder Tree

create a folder named _ISO at root folder

This folder tree is an example.

Any file name and folder name under _ISO is acceptable

J:
├─ _ISO
│  │  Hiren’s BootCD 15.2.iso
│  │  ubuntu-14.04.4-desktop-amd64.iso
│  │  Windows 10.iso
│  │  Windows XP sp3.iso
│  │  (32 folder and files limit in a folder)
│  │  
│  ├─IMA for Floppy
│  │      Bios updater.ima
│  │      MS-DOS 6.0.ima
│  │      Symantec Ghost.ima
│  │      
│  ├─RMD for Setup
│  │      Win 7Ent_x86_x64+8.1Pro+10Pro vol2.RMD
│  │      Win7_Ult_SP1_Russian_x64.RMD
│  │      Windows 10.RMD
│  │      
│  └─VHD for Booting
│      │  linuxmint-17.3-cinnamon-32bit.vhd
│      │  Windows 10 Win2Go.vhd
│      │  Windows 7 OS Booting.vhd
│      │  
│      └─Nested Sub-folders is OK
├─Your Folder 01
├─Your Folder 02
├─Your Folder 99
│  Your files 01.txt
│  Your files 02.txt
│  Your files 99.txt

2531 Keys

1. Navigation
   • Up/Down list - Up/Down Jog Dial
   • Select file - push Jog Dial
   • Go to Up folder - push BackUp button
2. Menu
   • To go to Menu - push Jog Dial
   • To exit - push BackUp button
3. Long key ( push for 3 seconds )
   • Lift up Jog Dial - refresh the file lists
   • Down Jog Dial - Go to Power Saving State
   • Push Jog Dial - enter to Menu
   • Push BackUp Button - Reboot. and detach all virtual drives (VHD, RMD, IMA)
4. Startup Keys (during startup)
   • Lift up Jog-Dial - Start up in CD-MODE
   • Down Jog-Dial - Start up in HDD-MODE
   • Push Jog Dial - Reset loading state. Start up in DUAL-MODE
   • Push BackUp Button - Start up in Write-Protected mode.

2541 Keys

1. Navigation
   • Up/Down list - 2 / 8
   • Select file - 5 (or 6, for maintaining loading state)
2. Menu
   • Menu - Go to Menu. (or Exit).
   • 4 - Go to upper list
3. Long key ( push for 3 seconds )
   • 1 - Go to Power Saving State
   • 3 - reboots iODD
   • 4 - refreshes file lists
   • 7 - Reboot. and detach all virtual drives (VHD, RMD, IMA)
   • 0 - Reboot. and Temporarily disable Write-Protection
4. There is not Startup key

Go to Power Saving State

Power Saving State : Spindle motor is stopped and LCD brightness is low.

CD loading state is saved.

• (2531) Down the Jog Dial for 3 seconds.
• (2541) Push the 1 button for 3 seconds.

Selecting a file

In order to maintain loading state, you must save the state.

Refer to the above key functions.

• (2531) #2531 Keys
  • If Firmware version is 1558 or higher, loading state is automatically saved.
  • If not, you must save it manually. (Go to Power Saving State)
• (2541) #2541 Keys
  • If Firmware version is lower than 6(7)9-05, button 6 has no function.

Safely Removal In OS

If iODD's partition is NTFS, this is mandatory when disconnecting iODD from host.

NTFS does not write Immediately the data to HDD.

• Please do Safely Removal before disconnection.
• If iODD is write-protected and an error message appears, reset write-protect option. and retry this.

Initialization

• Two sorts of the firmware are NTFS version and FAT32/exFAT version.
• NTFS firmware version is shipped.
• If you want FAT32 or exFAT Partition, download the NTFS Firmware Updater.
• follow the next steps

1. assemble the HDD or SSD with iODD
2. connect the iODD to PC
3. initialize the drive with MBR
4. Format the first partition with NTFS. (if the firmware is FAT, then format with FAT32 or exFAT)
   • At FAT32 there is 4G byte file size limitation. please use that carefully.
5. create _ISO folder in root folder. (not case sensitive)
6. create or copy *.ISO *.VHD *.RMD *.IMA (or sub folder tree) to _ISO folder
7. safely remove iODD. ( very Important if NTFS)
8. If Power Saving mode is active, then disconnect and reconnect the USB cable.
   • If not, then Go to Power Saving State
   • and if Plug Out ... message appears , disconnect and reconnect the USB cable.
9. it will display sequentially. : iodd 253(4)1 -> a file name

Initialize All

If Initialization fails, follow the next steps

1. disconnect the USB cable.
2. Get out the HDD from iODD. and Connect directly it to PC.
3. Initialize it with 'GPT'.
4. redo Initialization (from the first step). (your HDD is initialized in order MBR -> GPT -> MBR).

First Aid

If it has failure suddenly, try one of next steps until no error

1. (2531) press the Jog Dial and hold, and connect iODD to PC.
2. try Safely Removal In OS.
3. Check Disk for iODD ( for Windows)
4. Rename _ISO folder to old_ISO. Create new _ISO folder, and copy files to this folder. (not moving)
5. Update the latest firmware.
6. Backup the data of iODD, and Initialize All

If it is hardware problem

1. Reboot the PC
2. Change USB cable
3. Connect iODD to the port of PC back panel.
4. Try at other PC.
5. Change HDD.

Using Virtual USB Optical Drive (DVD-ROM or Blu-ray ROM)

1. copy ISO files to _ISO folder. (or sub folder)
2. Safely Remove. (necessary in NTFS )
3. If Power Saving mode is not active , then Go to Power Saving State
   • If Plug Out ... message appears, disconnect the iODD.
4. Connect iODD to a PC. and power on the PC.
5. (Optional) Make iODD or USB CD-ROM the first in the priority of BOOT sequence in BIOS.
6. (Not required if an ISO has been selected). select a ISO file. Selecting a file
7. If PC don't find booting device (iODD), then reboot the PC. (press Ctrl-Alt-Del)

Booting Error

• Confirm whether the ISO file is bootable.
• If your PC is old or does not provide multi LUN, please select CD-MODE (or ODD-MODE).
• In order to confirm whether the ISO file is bootable, please try to test it with the validated PC.
• Although it is bootable ISO file, please confirm whether it is same result with USB DVD-ROM.
• If It can boot in USB DVD-ROM and can not boot in iODD, please use USB Y-CABLE for adding external power.
• If your laptop has own internal DVD-ROM and iODD does not boot, please disable internal DVD-ROM at BIOS settings. or remove it.

Using Virtual USB fixed disk drive (Virtual Hard Disk)

• Only fixed VHD file is supported. (Not dynamic VHD nor VHDx files)
• Also fixed VMDK file is supported.
• Make VHD files directly by VHD Tool++. (VHD Tool++ can make a file without fragment)
• You can make VMDK by changing name *.VHD to *.VMDK
• Select VHD file (Selecting a file) and iODD will be rebooted with CD-MODE and is recognized as USB disk drive (Virtually).
• If you want DUAL-MODE or to change Write Protect option, rename the VHD file. Refer to VHD Tool++
• Max 4 Virtual Drive is supported at the same time ( Successive selection within 3 seconds)

1. Create a VHD file with using VHD Tool++ at _ISO folder
2. If successful, Do safely remove the iODD in OS. ( Very Important to NTFS)
3. If Power Saving mode is not active, then Go to Power Saving State
   • If Plug Out ... message appear, disconnect the iODD.
4. Connect iODD to your PC and power on the PC.
5. (Optional) Make iODD or USB CD-ROM the first in the priority of BOOT sequence in BIOS.
6. (Not required if a VHD has been selected) Select a VHD file Selecting a file.
7. If PC don't find booting device (iODD) then press Ctrl-Alt-Del to reboot the PC.

Using Virtual USB Removable Flash Drive (Virtual USB Flash Drive)

• Almost the same as the above method (Using Virtual USB fixed disk drive)
• But the file extension must be changed. VHD -> RMD

Using Virtual USB Floppy Drive (Virtual FDD)

• This method is not supported on all computers.
• Uncompressed floppy image IMA, IMG, BIF, VFD is supported.
• IMG, BIF, VFD image file extension must be renamed to IMA.
• Almost the same as the above method (Using VHD)