Difference between revisions of "Template:IODD Firmware Update"

Revision as of 14:38, 6 June 2016

Requirements : PC ( Windows OS, USB Port)

Warning - You must connect only one iODD device

Please update the exact firmware matching the first partition of iODD.

If you update wrong firmware, retry the updater with correct firmware.

Download the below firmware file.
Uncompress the zip file to proper folder.(Do not run it within zip file)
Run the EXE file.
If "Device is Detected" message appears, then press Update button.
- If not, follow the next steps
- Use another PC.
- Change the USB cable.
- Press the Reset button and hold, and connect the iODD, and hold until "iodd 25x1" appears in LCD. and Update.(This Reset button is on the main PCB inside iODD)
If successful, Press Exit button. and reconnect iODD.

@@ Line 5: / Line 5: @@
 # Download the below firmware file.
 # Uncompress the zip file to proper folder.(Do not run it within zip file)
-# Run the EXE file.
+# Run the <span class="notranslate">EXE</span>  file.
-# If "Device is Detected" message appears, then press ''Update'' button.
+# If <span class="notranslate">"Device is Detected"</span> message appears, then press <span class="notranslate">''Update''</span> button.
 #* If not, follow the next steps
 #* Use another PC.
 #* Change the USB cable.
-#* Press the Reset button and hold, and connect the iODD, and hold until "iodd 25x1" appears in LCD. and Update.(This Reset button is on the main PCB inside iODD)
+#* Press the Reset button and hold, and connect the iODD, and hold until <span class="notranslate">"iodd 25x1"</span> appears in LCD. and Update.(This Reset button is on the main PCB inside iODD)
-# If successful, Press ''Exit'' button. and reconnect iODD.
+# If successful, Press <span class="notranslate">''Exit''</span> button. and reconnect iODD.